Quando si sceglie un modulo telecamera per endoscopi

Quando scegli un modulo fotocamera per endoscopi, non guardare solo al conteggio dei pixel—AU-STAR ELECTRON spiega perché

Quando scegli un modulo fotocamera per endoscopi, non guardare solo al conteggio dei pixel—AU-STAR ELECTRON spiega perché "piccolo" è la vera sfida

Quando si sceglie un modulo telecamera per endoscopi, Don’t Just Look at Pixel Count—AU-STAR ELECTRON Explains Why “Small” Is the Real Challenge
L'anno scorso, un cliente che produce endoscopi industriali ci ha contattati. Il modulo della telecamera che stavano usando aveva un diametro esterno di 3,5 mm. Poiché il dispositivo doveva essere inserito in un tubo con un diametro di soli 4 mm, rimaneva meno di 0,5 mm di spazio per il modulo. Anche una leggera deviazione nelle tolleranze di assemblaggio impedirebbe che si adatti. Si rivolsero a diversi produttori di moduli fotografici, ma nessuno riuscì a fornire una soluzione adeguata a causa di vari fattori. Alla fine, sono venuti da noi. Dopo aver esaminato i disegni strutturali e finalizzato la disposizione del sensore e del FPC, abbiamo prodotto quattro versioni prototipo e alla fine ridotto il diametro esterno a 2,6 mm. Il cliente riceveva i campioni, li installava nelle apparecchiature, li testava e la soluzione superava l'ispezione.
Through this project, we’d like to discuss why, when it comes to endoscope camera modules, “small size” is a greater challenge than “pixel count.”

The biggest difference between endoscopic camera modules and standard modules is that the former must be inserted into “holes” inside the human body or industrial pipelines. With standard modules, if the dimensions are slightly larger or smaller, there’s usually a way to work around it structurally. This isn’t the case with endoscopes. The pipe diameter is fixed; if the module’s outer diameter is even 0.2 mm larger, it simply won’t fit.
The challenge lies in sensor packaging. Standard sensors use conventional packaging—a chip with leads—and their dimensions are fixed. Endoscopes, however, require wafer-level packaging or, in extreme cases, chip-level packaging to minimize the sensor’s size while maintaining image quality. There are very few sensor models capable of this type of packaging to begin with, so the options are extremely limited.
The challenge lies in PCB routing. The smaller the module’s outer diameter, the more line widths and spacing are pushed to their limits, making signal integrity a major issue.
The challenge lies in the lens. For lenses with an outer diameter of 2–3 mm, the optical design itself is a major hurdle. To ensure a sufficiently wide field of view, sufficient depth of field, and no loss of edge resolution, the number of suppliers capable of producing such lenses can be counted on one hand.
Consistency is another challenge. It’s one thing to produce a usable prototype; it’s quite another to ensure consistent quality in mass production. Endoscope camera modules require extremely high assembly precision, and the accuracy of anti-aliasing (AA) alignment directly determines image quality. Without automated equipment and strict quality control, yield rates cannot be improved.
Secondo la ricerca, i ricavi globali dei moduli per fotocamere endoscopiche sono previsti per raggiungere circa 5,188 miliardi di yuan nel 2025 e avvicinarsi a 7,875 miliardi entro il 2032. La crescita degli endoscopi monouso è uno dei principali fattori.

AU-STAR ELECTRON produce e sviluppa moduli per fotocamere presso la sua base di ricerca e sviluppo di Shenzhen da oltre 15 anni e vanta una vasta esperienza in soluzioni di miniaturizzazione.
Experience with micro-camera modules. Our endoscope solutions allow us to collaborate with customers on even more extreme structural optimizations. FPC/PCB layout, connector selection, and sensor packaging methods are all tailored to the customer’s tube diameter requirements.
Sensor selection support. Not all sensors are suitable for endoscopes. We recommend suitable sensor solutions based on the customer’s size constraints and imaging requirements. We have established channels for sensors with small packages, MIPI/USB support, and low power consumption.
Lens matching. Endoscope lenses aren’t a “one-size-fits-all” solution. The field of view, depth of field, and edge resolution must all be matched to the sensor. We have our own optical selection capabilities—we don’t just force-fit generic lenses.
Prototipazione a piccoli lotti. I progetti di endoscopio tipicamente prevedono bassi volumi iniziali ma standard elevati. Ci occupiamo di questo tipo di progetti. La tempistica del prototipo dipende dalla soluzione specifica, ma il primo prototipo è solitamente pronto entro tre-quattro settimane.

If you’re developing an endoscope—
whether it’s an industrial endoscope or a disposable endoscope solution—feel free to contact us at any time. Provide your tube diameter requirements and imaging specifications. We’ll see if our existing micro-camera solutions match your needs. If they don’t, we’ll explain where the bottleneck lies—we won’t push a solution that doesn’t fit.

HONG KONG AU-STAR ELECTRON TECHNOLOGY CO., LIMITATA.
Specializzato in moduli per fotocamere CMOS da oltre 15 anni | Fornire soluzioni visive per moduli di micro-endoscopi per telecamere

Condividi questo post: